Introduction
Oxygen depletion has always been a problem associated with warmer
water and higher stocking levels
“NOT ANYMORE”.
Koi and aerobic bacteria in particular are extremely reliant on
well-oxygenated water requiring a minimum of 6mg per ltr. Realising
the importance of oxygenation in today’s fish keeping environments
and especially due to the increasing popularity of heating.
REOXAiR have
after considerable research developed the Microbubbler.
Manufactured from a strong purposely-designed perforated rubber membrane with solid pvc core it is self-weighting and “ENTIRELY FISH SAFE” , medication and UV resistant. Being “TOTALLY” devoid of any raised or sharp edges to damage your fish. Suitable for both salt or fresh water aquatic or bio environments and any temperature.
It is equally at home in not only Koi or garden ponds, commercial fish farms and aquariums marine or fresh water both domestic and commercial. but also filters (where the gentle aeration and high oxygenation supports bacteria with minimum disturbance to detritus).
Technical
The range consists of five standard lengths. Prices are inclusive of VAT and would include free shipping on retail sales to the U.K.
|
|
Length |
Price |
recommended airflow |
330mm |
£22.99 |
10-30 ltrs per min |
500mm |
£28.99 |
20-40 ltrs per min |
750mm |
£36.99 |
20-60 ltrs per min |
1000mm |
£44.99 |
20-80 ltrs per min |
2000mm |
£69.99 |
40-120 ltrs per min |
|
Custom made sizes are available up to 2000mm in length with all sizes having 180 micro engineered valve perforations per 25mm sq. Depending on the chosen size this is equal to between 2,000 and 12,900 perforations, giving greater surface areas and thus far greater oxygenation than anything else currently available.
Each unit come with a standard 4mm airline connection with conversion fittings up to 8mm or 10mm for the larger sizes. The recommended airflow is between 20-120 litres per min depending on the size of unit being used. |
Due to the unique “REEDVALVE”
design of the perforations it is for the most part self-cleaning
and extremely low maintenance. Giving years of trouble free operation
it requires only very occasional removal and a wipe
down with a clean cloth.
The valve system closes down when air is removed, which not only
prevents dirt particles from entering but also eliminates the possibility
of back siphoning.
Read more Technical Information.
Operation

Click For Bigger Image
|
Simply connect to a suitable air supply
and place anywhere in the pond or aquarium. The bubbles created
by the Microbubbler are
so small in diameter, (Less than 0.5mm at source) that the surface
area of the rising mist of air dissolves oxygen into the water
far more efficiently than conventional air stones.
It creates far less surface disturbance allowing viewing
from above without the necessity to turn off the air supply,
while still supplying a greater level of dissolved oxygen.
When placed strategically in its environment it eliminates
dead spots. |
Is aesthetically pleasing and an obvious enjoyable experience for
your fish as they swim through the wall of micro diffused air.
|